↓
↓
|
1
噸 水質污水 |
→
|
|
→
|
|
→
|
|
→
|
|
Application description
Nano-polymer operation manual
[component]
The
formations of Nano-polymer are consisted of polymer A and polymer B
1.
The component of polymer A are constituted of specific carbon A mixture and
related
ingredients
2.
The component of polymer B are constituted of specific carbon B mixture and
related
ingredients
[use]
The
usage of Nano-polymer are suggested to be used at water diluent, not
suggested
to
use at the powder type to prevent the incorrect trans-purifying purification
reaction
[preparation] before
usage, the polymer A and polymer B of Nano-polymer are needed to
be
diluted into water diluent primarily
1.
The preparation of polymer A diluents
polymer
A powder
+
clear water
=
polymer A diluents
1
kg powder
10 liters
10 liters A diluents
2.
The preparation of polymer B diluents
polymer
B powder
+
clear water
=
polymer B diluents
1
kg powder
10 liters
10 liters B diluents
[Remarks]
a. The polymer A/B diluent can be used immediatedly, more better at after 2~3
hours
preparations
b.
The
polymer A/B diluent are suggested to be usage within 3~7 days
[operation]
1.
The purification dosage operation
|
Dosage |
Polymer A diluent + Polymer A diluent |
Treated volumes |
|
300
ppm (high dosage) |
1 liter A diluent + 1 liter B diluent |
0.35
tons (350 liters) |
|
200
ppm (high dosage) |
1 liter A diluent + 1 liter B diluent |
0.5
tons (500 liters) |
|
100
ppm (low dosage) |
1 liter A diluent + 1 liter B diluent |
1
tons (1000 liters) |
|
50
ppm (low dosage) |
1 liter A diluent + 1 liter B diluent |
2
tons (2000 liters) |
|
10
ppm (low dosage) |
1 liter A diluent + 1 liter B diluent |
10
tons (10000 liters) |
1.
The operation procedure ----example: 100 ppm dosage
application
a.
step 1: add
100 ppm polymer A diluents into the treated water, wastewater firstly,
and
mixing 1~2 minutes
b.
step 2: add
100 ppm polymer B diluents into the step 1 mixing treated water, waste
water,
and mixing 1~2 minutes
c.
step 3: stand
the reactive treated water, wastewater to sedimentation, and inspect
the
purification effect after 10~30 minutes, 1~3 hours, 1~3 days reaction
|
Polymer A
diluent
mixing
Polymer B diluent
mixing
precipitation
1 liter
1~2 minutes
1 liter
1~2 minutes
10~30 minutes
1~3
hours/days
check
the result |
|
|
↓
↓ |
|
|||||||||||||||||
|
|
|
→ |
|
→ |
|
→ |
|
→ |
|
|
|||||||||
↑
1 tons
water/wastewater
Bright Glory enterprise,Co.Ltd/
SanDa membrane &
Nano,Co.Ltd
5F-3, No.162, Sec. 4,
Chunghsiao E. Road, Taipei, Taiwan
Tel:
886-02-2731-8306
Fax: 886-02-2731-8221
web site: www.bge.com.tw web site: http://3w.bge.com.tw Email: hong@bge.com.tw
2003.11.25 copy right