Wastewater Nanometric Polymer: One cut SS Pre-treatment wastewater polymer design, One way SDI End-treatment wastewater polymer design

Wastewater Nanometric Polymer

One cut SS suspended solids wastewater polymer design

One way SDI silt density index wastewater polymer design

The design of Nano-polymer treatment technology are applied the proprietary specific functional mechanism (media) to function the specific wastewater contaminants being transformed into the concentrated, coagulated, fibrous and granular silt sedimentation, also applied the the concentrated, coagulated, fibrous and granular silt to adsorb and bind the untransformed water contaminants into silt sedimentation to purify the purified wastewater up to crystal clear effectively

Wastewater nanometric polymer are consisted two compositions of one type of nanometric grade carbon polymer A and another type nanometric grade carbon polymer B component which breakthrough and overcome the purification design and technique of conventional water polymer to concentrate and purify the impurities, solids, suspended solids, oil/grease, color, odor, organic matter, chemical, toxic chemical, heavy metal being transformed into the concentrative, fibrous and granular silt sedimentation clear instantly, effectively and simultaneously which are divided into suspended solids wastewater polymer and silt density index wastewater polymer, and also can be widely used at all kind of wastewater treatment to do simple, economic, convenient, fast, effective and practical wastewater treatment application

[Features]

1. low dosage purification application

a. low purification disage: 50~100 ppm

b. high purification dosage: 200~300 ppm

2. economic purification application:

a. SS nano-polymer cheaper than PAC

b. SDI nano-polymer cheaper than PAM

3. instant & fast purification application:

3~5 minutes reactions can be transformed

SS/BOD/COD, heavy metal contaminants

into the coagulated silts sedimentation being

purified up to crystal clear water effectively

4. multiple effective purification application:

can be applied at the pre-treatment purification application, and also applied at the post-

treatment purification application too; can be applied to purify all the contaminations

clear up to crystal clear water at one step unit operation instantly and effectively

5. multiple functional purification application:

can be applied at the all kinds of SS/BOD/COD, color, oil/grease, toxic chemical, heavy

metal contents of wastewater purification treatment

6. As wastewater detoxifier and detoxification purification treatment:

can be concentrated and purify the toxin, chemical, oil/grease, toxic chemical, heavy

metal and BOD/COD contents clear to reduce down the wastewater biochemical,

chemical and heavy metal toxicity effectively

New concept．Technology．application of wastewater treatment

New trans-purifying technology

(one-cut SS suspended solids purification technology and design˙

one-way SDI silt density index purification technology and design)

Can be transformed the larger than 0.1 micron rate contaminations into silt, also transformed the smaller than 0.1 micron rate contaminations into silt effectively

[principle]

During the process of trans-purifying reaction, apply the contaminations of bacteria, algae, oil, grease, gel, colloids, emulsion as the trans-purifying agent which can be functioned the larger than 0.1 micron rate contaminations of impurities, solids, suspended solids, color, organic matter, oil/grease, emulsion to be transformed into fibrous granular silt sedimentation and purified up to crystal clear wastewater effectively, also can be functioned the smaller than 0.1 micron rate contaminations of organic matter, chemical, toxic chemical, heavy metal to be transformed into fibrous granular silt sedimentation and purified the silt density index clear up to crystal clear wastewater effectively

[one-cut SS suspended solids purification technology and design]

During the trans-purifying process reaction, apply bacteria, algae, oil/grease, colloids, emulsion as the trans-purifying agent being functioned the larger than 0.1 micron rate contaminations of impurities, solids, suspended solids, color, organic matter to be transformed into fibrous granular silt sedimentation, purified the wastewater up to crystal clear, and reduced down SS/BOD/COD contents effectively are called “one-cut SS suspended solids purification technology and design”

100 20 1 0.1 0.01 0.001 0.0001

micron micron micron micron micron micron micron


	The distribution contents of larger than 0.1 micron rate contaminations a.low SS/BOD/COD: >99% b.high SS/BOD/COD:<90~99%			smaller than 0.1 micron contaminations distribution rate a.low SS/BOD/COD: <1% b.high SS/BOD/COD: >1~10%
	↓90~95% transformed into silt			↓10~30% transformed into silt
	The residues of larger than 0.1 micron rate contaminations determined the clarity of purified wastewater			The residues of smaller than 0.1 micron rate silt density index determined the clarity of crystal clear wastewater

[one-way SDI silt density index purification technology and design]

During the successive trans-purifying process reaction, the trans-purifying agent of bacteria, algae, oil/grease, colloids, emulsion can be functioned the larger and smaller than 0.1 micron rate contaminations of impurities, solids, suspended solids, color, organic matter, chemical, toxic chemical, heavy metal to be transformed into fibrous granular silt sedimentation and purified the waste water up to crystal clear, also purified silt density index clear effectively, after successive process treatment, The SS/BOD/COD/heavy metal residues can be purified very clear are called “one-way SDI silt density index purification technology and design”

[The primary unit operation process treatment]

100 20 1 0.1 0.01 0.001 0.0001

micron micron micron micron micron micron micron


	The distribution contents of larger than 0.1 micron rate contaminations a.low SS/BOD/COD: >99% b.high SS/BOD/COD:<90~99%			smaller than 0.1 micron contaminations distribution rate a.low SS/BOD/COD: <1% b.high SS/BOD/COD: >1~10%
	↓90~95% transformed into silt			↓50~70% transformed into silt
	The residues of larger than 0.1 micron rate contaminations determined the clarity of purified wastewater			The residues of smaller than 0.1 micron rate silt density index determined the clarity of crystal clear wastewater

[The successive unit operation process treatment]

100 20 1 0.1 0.01 0.001 0.0001

micron micron micron micron micron micron micron


	The residues of larger than 0.1 micron rate contaminations after primary treatment Residues: 5~10%			The residues of smaller than 0.1 micron rate contaminations after primary treatment Residues: 30~50%
	↓90~95% transformed into silt			↓50~70% transformed into silt
	The residues of larger than 0.1 micron rate contaminations more less, The purified water will be more clear			The residues of smaller than 0.1 micron rate silt density index determined more less, The SS/BOD/COD residues will be more less

Suspended solids wastewater Polymer

(One-Cut SS suspended solids wastewater nanometric polymer)

One cut SS suspended solids purification design: one step unit operation to purify the larger than 0.1 micron rate contaminations clear and purified the wastewater up to crystal clear, also reduced down SS/BOD/COD contents effectively

[purification design and effect]

The purification effect and design of suspended solids wastewater polymer are designed to establish the trans-purifying mechanism to be functioned the larger than 0.1 micron rate wastewater contaminations of impurities, solids, suspended solids, color, odor, oil/grease, emulsion organic matter being transformed into the fibrous and granular silt sedimentation, also applied the the fibrous and granular silt to adsorb and bind the untransformed larger than 0.1 micron rate contaminations of impurities, solids, suspended solids, color, odor, organic matter and smaller than 0.1 micron rate contaminations of organic matter, chemical, toxic chemical, heavy metal into silt sedimentation to purify the purified wastewater up to crystal clear and reduced down SS/BOD/COD contents effectively

[The flow chart of suspended solids wastewater polymer operation]

100 20 1 0.1 0.01 0.001 0.0001

micron micron micron micron micron micron micron


	biomatter, organic matter
	oil/grease, emulsion	color, odor, gel, colloid,
impurities, solids, suspended solids		chemical, toxic chemical
			heavy metal

	suspended solids wastewater polymer
	↓
larger than 0.1 micron rate contaminations distribution rate a. low SS/BOD/COD: >99% b. high SS/BOD/COD: <90~99%		smaller than 0.1 micron rate contaminations distribution rate a. low SS/BOD/COD: <1% b. high SS/BOD/COD: >1~10%
↓		↓
90~95% larger than 0.1 micron rate suspended solids contaminations transformed into silt sedimentation		10~30% smaller than 0.1 micron rate silt density index contaminations transformed into silt sedimentation
↓		↓
The residues of larger than 0.1 micron rate suspended solids contaminations Residues: 5~10%		The residues of smaller than 0.1 micron rate silt density index contaminations Residues: 70~90%

[The test experiment and data of suspended solids wastewater polymer

applied at the water purification treatment]

a. The test experimental data of 200 ppm dosage of suspended solids wastewater polymer

applied at city wastewater purification treatment

test items	raw water contamination data	the test data after suspended solids polymer treatment
PH	7.64	7.62
SS	1350	55
COD	1510	215
BOD₅	950	156
nitrates	120	72.8
phosphates	25	4.0

b. The test experimental data of 200 ppm dosage of suspended solids polymer applied at

the after 1st class wastewater treatment water purification treatment

test items	raw water contamination data	the test data after suspended solids polymer treatment
PH	9.35	7.76
SS	25	<5
COD	65	<15
BOD₅	20	13.5
color	1	1

c. The test experimental data of 200 ppm dosage of suspended solids polymer applied at

coke/tar wastewater purification treatment

contaminations of raw coke/tar wastewater: COD:25000~30000 ppm,

NH₃-N: 2000~3000 ppm

phenol: 2000~3000 ppm

oil: 800~1000 ppm

sulfide: 460 ppm

color: 2400 ptco unit

test items	The test data of discharge waste water after dilution treatment	the test data after suspended solids polymer treatment
PH	7.95	6.94
SS	48 ppm	5 ppm
COD	86 ppm	<15 ppm
BOD₅	50 ppm	<5 ppm
color	2 ptco unit	2 ptco unit

d. The test experimental data of 200 ppm dosage of suspended solids polymer applied at

TNT wastewater purification treatment

test items	The test data of discharge waste water after dilution treatment	the test data after suspended solids polymer treatment
PH	6.98	6.46
SS	25 ppm	<5 ppm
COD	150 ppm	<15 ppm
BOD₅	5 ppm	<2 ppm
color	2 ptco unit	1 ptco unit

Silt density index wastewater polymer

(One-way SDI silt density index wastewater Nanometric polymer)

One-way SDI silt density index purification design: one step unit operation to purify the larger and smaller than 0.1 micron rate SDI contaminations clear and purified wastewater up to crystal clear, and reduced down SS/BOD/COD, toxic chemical, heavy metal contents effectively

[purification design and effect]

The purification effect and design of Silt density index wastewater polymer are designed to establish the trans-purifying mechanism to be functioned the larger than 0.1 micron rate wastewater contaminants of impurities, solids, suspended solids, oil/grease, color, odor, organic matter and the smaller than 0.1 micron rate wastewater contaminants of organic matter, chemical, toxic chemical, heavy metal being transformed into the fibrous and granular silt sedimentation, also applied the the fibrous and granular silt to adsorb and bind the untransformed larger than 0.1 micron rate contaminations of impurities, solids, suspended solids, color, odor, organic matter and smaller than 0.1 micron rate contaminations of organic matter, chemical, toxic chemical, heavy metal into silt sedimentation to purify wastewater up to crystal clear, and reduced down SS/BOD/COD, toxic chemical, heavy metal contents effectively

[The flow chart of silt density index polymer operation]

100 20 1 0.1 0.01 0.001 0.0001

micron micron micron micron micron micron micron


	biomatter, organic matter
	oil/grease, emulsion	color, odor, gel, colloid,
impurities, solids, suspended solids		chemical, toxic chemical
			heavy metal

	Silt density index wastewater polymer
	↓
larger than 0.1 micron rate contaminations distribution rate a. low SS/BOD/COD: >99% b. high SS/BOD/COD: <90~99%		smaller than 0.1 micron rate contaminations distribution rate a. low SS/BOD/COD: <1% b. high SS/BOD/COD: >1~10%
↓		↓
90~95% larger than 0.1 micron rate suspended solids contaminations transformed into silt sedimentation		50~70% smaller than 0.1 micron rate silt density index contaminations transformed into silt sedimentation
↓		↓
The residues of larger than 0.1 micron rate suspended solids contaminations Residues: 5~10%		The residues of smaller than 0.1 micron rate silt density index contaminations Residues: 30~50%

[The test experiment and data of silt density index polymer applied

at the water purification treatment]

a. The test experimental data of 200 ppm dosage of silt density index polymer applied

at the rain water purification treatment

test items	raw water contamination data	the test data after PAC treatment	the test data after silt density index polymer treatment
PH	7.43	6.9	7.25
color	60 ptco unit	30 ptco unit	33 ptco unit
COD	41 ppm	32 ppm	13 ppm
TDS	100 ppm	110 ppm	100 ppm
turbidity	20 NTU	2 NTU	1 NTU

b. The test experimental data of 200 ppm dosage of silt density index polymer applied at

the penicillium wastewater purification treatment

test items	raw water contamination data	the test data after PAM treatment	the test data after silt density index polymer treatment
PH	8~9	7	7
COD	4200 mg/L	1500 mg/L	<100 mg/L
NH₃-N	900 ppm	91 mg/L	<60 mg/L

c. The test experimental data of 200 ppm dosage of silt density index polymer applied at

the electroplating wastewater purification treatment

test items	electroplating waste water contamination data	the test data after PAM polymer treatment	the test data after silt density index polymer treatment
PH	4.5	7	7.3
CN-	70 ppm	undetectable	undetectable
Cr⁺⁶	86 ppm	undetectable	undetectable
COD	550 ppm	237 ppm	<100 ppm

d. The specific research organization test experimental data of 50~100 mg/L

dosage of PAM polymer applied at swine wastewater treatment for reference

The wastewater contaminations: SS:1400 mg/L, phosphates/NH₄: 40 mg/L

PAM dosage	SS removing rate	SS residues	total phosphates removing rate	total phosphates residues
2 mg/L	200~400 mg/L	1000~1200 mg/L	7~11 mg/L	29~33 mg/L
5 mg/L	700 mg/L	700 mg/L	20~22 mg/L	18~20 mg/L
10 mg/L	800 mg/L	600 mg/L	26~28 mg/L	12~14 mg/L
25 mg/L	1100~1200 mg/L	400~500 mg/L	34~37 mg/L	3~6 mg/L
50 mg/L	1200~1250 mg/L	150~200 mg/L	38~40 mg/L	<2 mg/L
100 mg/L	1250 mg/L	150 mg/L	>40 mg/L	undetectable

The point of the market and application of conventional wastewater treatment system design improvement are not the main development direction and application market of wastewater nanometric polymer marketing promotion & sale operation and business:

Each country, government, environmental organization, research department, manufacturers, enterprises and customers have so many powerful, prestigious, authoritative, special wastewater treatment company, specialist, professor, scholar, researcher and technician to do effective wastewater treatment research, design, management, operation and application, and the wastewater treatment market also have so many new innovative, pioneer, head, outstanding, famous technology, design and products being used and application

Up to now, Almost all of customers are still unwilling to do correct waste water treatment investment, spend more money and expense for effective wastewater treatment, and normally almost all of customers are already mounted up wastewater treatment system and have exclusive outstanding specialist and technician to design, manage and control the wastewater treatment system operation, So the application defect and problems of the existed wastewater treatment system operation should be solved and overcome by themselves

Regard to the conventional wastewater purification treatment design, They are hard to be applied the Nano-polymer laddering batched continuous process design to do the high efficient purification effect up to 95~99.9% of simple, economic, effective, and practical SS/BOD/COD wastewater treatment and application, and the wastewater Nano-polymer are also not planned to offer the service to improve the defect of conventional wastewater treatment process design and application, So the market and application of conventional wastewater treatment system design improvement are not the main development direction and application market of wastewater nanometric polymer marketing promotion & sale strategy, except mounted up new system, new design, new process and new application, and we are only established the specific water management contract marketing promotion & sale operation to promote and sale the Nano-polymer into wastewater treatment market for further effective wastewater treatment application

Basically, The marketing strategy of wastewater nano-polymer promotion & sale operation are only serviced to the sole specific nano-polymer water management contract cooperator and the specific nano-polymer process design and system customers under the specific nano-polymer water management contract agreement, and not doing the simple service and sale the wastewater nano-polymer products to non-specific nano-polymer water management contract agreement customers

The point and mode of the specific nano-polymer water management contract marketing & business operation and management:

1. according to the treatment capacity, contaminations concentration and

contents, and the process purification rate to set up the Nano-polymer

process purification treatment design and application

2. according to the Nano-polymer process purification treatment design

and application to set up the quantities of use and supply

3. according to make mutual benefit, share profit and the user’s charge

concept to set up the point and mode of the specific nano-polymer

water management contract of marketing & business operation and

management

If some country, government, environmental department, research organization, manufacturers and customers are really interesting our wastewater nano-polymer to establish new wastewater treatment design and application to do simple, economic, effective and practical waste water treatment, also have planned to offer the R&D budget, consultant fee for further effective Nano-polymer process design and application under the specific Nano-polymer water management contract agreement

Originally, We are not refused communicate and negotiate, and also not rejected to offer the service, but it’s needed under the clear sincerity, mood and intentions situations, don’t wasted too much mutual times and moneys

If you are like to see the more further details and clear application information and literatures of the conventional wastewater treatment design, products and application, and the further effective wastewater nano-polymer products and application, Please visit the description of wastewater treatment

Bright Glory Enterprise,Co.Ltd/

SanDa membrane & Nano,Co.Ltd

5F-3, No.162, Sec. 4, Chunghsiao E. Road, Taipei, Taiwan

Tel: 886-02-2731-8306 Fax: 886-02-2731-8221

web site: www.bge.com.tw web site: http://3w.bge.com.tw Email: hong@bge.com.tw

2005.03.19 copy right