Nuclear & radiation

    air, water, wastewater

 purification and waste treatment

air, ultra pure water, cooling water, circulating water, waste water, wasted solutions, wastes, anti-corrosion and storage treatment

 

Regard to involve the security of nuclear power plant and the radiation contaminations of environment, The desalination treatment of ultra pure water and pollution control are very important at the nuclear power plant and radiation contaminations of air, ultra pure water, circulating water, cooling water, waste water, wasted solutions, wastes, anti-corrosion and storage treatment

 

Due to the NaCl salt contents of Na+ ions, Cl- ions and the radiation contaminations of Ur, Cs at the air, water, wastewater, wasted solutions are hard to be purified by the conventional air, water and wastewater purification treatment design clear effectively, and the Nano-polymer can be done effective desalination treatment and effective radiation contaminations of Ur, Cs at the air, water, wastewater, wasted solutions

purification treatment, So we are introduced the Nano-polymer products

into the market of nuclear power plant and radiation air, water, waste water and wasted solutions purification application for your reference.

 

1.The desalination treatment and application are very

  important at the nuclear power plant

2.The Cl-, Ur, Cs contaminations of air, water, wastewater,

  wasted solutions are hard to be purified clear effectively

 by the conventional purification design and treatment

3.The desalination of air, water are effective improved the

  corrosion problems of nuclear power plant

4.The effective deionization of air, water, wastewater,

  wasted solutions are redounded to reduce the treated

  volumes and reservoir space

 

Although the conventional air, water, wastewater and wasted solutions

purification treatment design and application of nuclear power plant can be purified the radiation contaminations clear effectively and completely,

however, there are still existed some headache problems that are hard to be solved and overcome:

 

1.only purified a little volumes and low quantities of air, water, waste

 water and wasted solutions radiation contaminations clear effectively

which will be produced and generated the lots of large volumes and high

quantities of low radiation intensity wastes being wasted and reserved

2.The radiation contaminations are hard to be degraded and decomposed

into inactive effectively, So needed more space for the lots of large

 volumes and high quantities of low radiation intensity wastes reserved

　

 

1.The radiation intensity and dosage can not be too

  high and the radiation wastes can not be collected

  too concentratively which will be influenced the

  operation, control and management

 

2.The low TDS purification effect of conventional air,

  water, wastewater purification treatment design are

  hard to purify the radiation contaminations clear

  effectively

 

 

        The Nano-polymer applied at

          nuclear & radiation air, water

   purification and waste treatment

air, ultra pure water, cooling water, circulating water, waste water, wasted solutions, wastes, anti-corrosion and storage treatment

 

The nuclear & radiation air, water, wastewater and wasted solutions purification treatment are not the main topics, market and goals of the Nano-polymer promotion sales

 

Due to the sea water are the main water sources of nuclear power plant and the desalination treatment are very important at the nuclear power plant treatment and application, and the Nano-polymer have the good purification effect at the radiation contaminations of air, water, waste water and wasted solutions purification treatment

 

So we are introduced the Nano-polymer products into the market of nuclear power plant and radiation air, water, waste water and wasted solutions purification application for your reference.

 

一.The advantage of Nano-polymer are applied at the

  desalination treatment of nuclear power plant

 

  1. Can be desalinated the sea water into fresh water effectively

    and prevented the corrosion problems effectively

  2. One step unit operation of Nano-polymer can be substituted

    one step RO/distillation unit operation application

  3. applied at the pre-treatment of RO/distillation which can be

    purified the silt density index clear effectively, reducing the

    cake and scale effect of RO/distillation unit and increasing

    RO treated volumes up to 2~5 folds

  4. Can be reduced RO/distillation investment and eliminated

    The desalination costs and expense effectively

 

二.The advantage of Nano-polymer are applied at the

  radiation contaminations of air, water, wastewater

  and wasted solutions treatment

 

  1. Can be concentrated, encapsulated and purified the radiation

    contaminations into the concentrative, coagulated silt

    sedimentation, reduced down the silt volumes and purified

    the water up to crystal clear effectively

  2. The concentrative, coagulated silt are easy to be dewatered,

    dried and separated which are suitable for reserve

  3. The specific nano-polymer design can be reduced down the

    radiation intensity of concentrated and coagulated silts

    effectively which are suitable for operation, control and

    management

  4. can be reduced down the purification treatment investment

    and purification costs and expense effectively.

 

The following description of the advantage of Nano-polymer are applied at nuclear & radiation

air, water, wastewater, wasted solutions treatment

being reduced the wastes volumes and quantities,

nuclear power plant corrosion and reserved space:

 

一.The advantage of Nano-polymer are applied at the

   radiation air contaminations purification treatment

 

   1. The purification effect of conventional air purification treatment

     design and units: like dust collector, bag filter, heap filter, scrubber,

     RO membrane, applied at air pollution treatment

 

     a. can be purified the larger than 0.1~100 micron particle sizes of

       air contaminations clear, The maximum purification rate of one

       step unit operation up to 99~99.9%

     b. can be purified the smaller than 0.1~0.0001 micron particle sizes

       of air contaminations (volatile organic chemical) clear, The

       maximum purification rate of one step operation up to 90~99.5%

     

1. hard to separate the purified contaminations out of

  air purification design and units effectively

2. produced and generated the lots of large volumes and

  high quantities of low intensity contaminations of

 units, accessories, wastes for treatment and reserve

 

   2. The purification effect of nano-polymer process purification design

     applied at air pollution treatment

 

     The purification effect of nano-polymer process purification design

     applied at air pollution treatment are very simple and easy which

     are only applied the grasping and trans-purifying purification effect

     being transformed the air contaminations into water contaminations

 

     a. can be purified the larger than 0.1~100 micron particle sizes of

       air contaminations clear, The maximum purification rate of one

       step unit operation up to 99.9~99.99%

     b. can be purified the smaller than 0.1~0.0001 micron particle sizes

       of air contaminations (volatile organic chemical) clear, The

       maximum purification rate of one step operation up to 95~99.5%

 

radiation air

contaminations

→

Nano-polymer

purification design

→

radiation water

contaminations

 

              ↓

 

 

1.the transformation purification rate of larger than 0.1~ 100 micron rate of air

  contaminations up to 99.9~99.99%

2. the transformation purification rate of smaller than 0.1~ 0.0001 micron rate of

  air contaminations up to 95~99.5%

 

 

1. can be separated the purified contaminations out of

  air purification design and units clear automatically

  which are reduced down the residual radiation

  contaminated dosage and intensity of air purification

  design and units effectively

2. eliminated the lots of large volumes and high

  quantities of low radiation intensity contaminations

 of units, accessories, wastes for treatment and reserve

 

 

二.The advantage of Nano-polymer are applied at the

   desalination treatment of nuclear power plant to

   purify the sea water up to ultra pure water

 

   1. The purification effect of conventional RO/distillation units applied

     at the desalination treatment being purified the high TDS: 17000~

     35000 ppm contents of sea water up to ultra pure water

 

     a. Normally, there are needed at least two RO/distillation process

       purification design which are applied to purify the high TDS:

       17000~35000 ppm contents of sea water up to low TDS contents

       low than <100 ppm of fresh water; there are still needed the

       further one step RO/distillation process purification design to

       purify the fresh water more clear up to the conductivity low than

       18.2 mega ohms, Fe++ ions contents low than 0.2 ppb of ultra

       pure water

     b. Although the distillation effect can be concentrated and purified

       the high concentrated Na+ ions and Cl- ions of TDS contents

       clear effectively, however, The distillation treatment capacity too

       small are hard to meet the large volumes and quantities of sea

       water desalination treatment needs

     c. Although the RO purification treatment capacity are more higher

       and larger, But RO membrane are easy to be caked and scaled,

       and needed to be clean, backwash and replacement constantly,

       the purification treatment capacity are hard to be controlled

       which are suitable for low Na+ ions and Cl- ions concentration

       of low TDS contents of sea water desalination treatment

       application; If the RO pre-treatment design can not be designed

       to purify the silt density index clear effectively, The application

       of RO desalination treatment are more difficult and worse than

       distillation desalination treatment, and the purification costs and

       expense are more expensive than distillation treatment

 

   2. The purification effect of Nano-polymer applied at the desalination

     treatment being purified the high TDS: 17000~35000 ppm contents

     of sea water up to ultra pure water

 

     It’s the main point of our company are introduced and promoted

     the nano-polymer into the desalination treatment and application

 

     a. only needed low dosage purification effect of nano-polymer

       which can be desalinated the high NaCl salts and Na+ ions, Cl-

       ions contents of sea water into low the NaCl salts and Na+ ions,

       Cl- ions contents of fresh water

     b. applied at the pre-treatment of RO/distillation unit which can be

       desalinated the high NaCl salts and Na+ ions, Cl- ions contents

       of sea water into low the NaCl salts and Na+ ions, Cl- ions

       contents of fresh water effectively, also eliminated the corrosion

       effect of units, pipes, accessories effectively

     c. simplified the RO/distillation process purification procedure

       step, eliminated RO/distillation investment and reduced down

       RO/distillation costs and expense effectively, also increased RO

       treatment capacity up to 2~5 times

 

The conventional deionization design and units: like ion

exchange resin, electrodialysis(EDI), RO membrane and PAM are hard to be applied to purify the high NaCl salt,

Na+ ions, Cl- ions contents and silt density index(SDI)

clear effectively(except distillation design and units):

 

The desalination nano-polymer can be substituted the

distillation design and units to be applied to purify the high NaCl salt, Na+ ions, Cl- ions contents and silt density index(SDI) clear effectively

 

1. The general purification effect of desalination polymer can

  be purified the high NaCl salt, Na+ ions, Cl- ions contents

  and silt density index(SDI) clear up to 50~ 70%

2. The specific purification effect of desalination polymer can

  be purified the high NaCl salt, Na+ ions, Cl- ions contents

  and silt density index(SDI) clear up to 70~95%

 

 

三.The advantage of Nano-polymer are applied at the

   radiation contaminations purification treatment of

   circulating water, cooling water, wastewater and

   wasted solutions

 

    It’s the main point of our company are introduced and promoted

    the nano-polymer into the radiation contaminations purification

    of circulating water, cooling water, wastewater, wasted solutions

    treatment and application

 

 

   1. The purification effect of conventional water purification treatment

     design and units: like ion exchange resin, MF/RO filter, carbon

     filter, distiller and PAC/PAM polymer, applied at circulating water,

     cooling water, wastewater, wasted solutions treatment

 

     a. low purification effect to purify the radiation contaminations

       clear which generated and produced the lots of much volumes

       and large quantities of low intensity radiation contaminations

       wastes for further effective treatment and reserve

     b. the high intensity radiation contaminations of the accumulated

       wastes: like filter press, distillation units are hard to do further

       effective treatment and reserve

 

After purification treatment, Too much heavy low radiation intensity wastes being treatment and reserve are headache problems of conventional cooling water, circulating water, wastewater and wasted solutions contaminations treatment

 

 

   2. The purification effect of nano-polymer purification treatment

     applied at the low radiation contaminations of circulating water,

     cooling water, wastewater, wasted solutions treatment

    

 

     a. low dosage and high purification effect to concentrate and

       encapsulate the radiation contaminations into the concentrated

       coagulated silts sedimentation, and purify the radiation

       contaminations of cooling water, circulating water, wastewater,

       and wasted solutions clear effectively

     b. the specific nano-polymer design can be reduced down the

       radiation intensity of concentrated accumulative silts effectively

     c. the concentrated coagulated silts are easy to be dewatered, dried,

       separated and reduced down intensity effectively which are

       suitable for further effective treatment and reserve

     d. eliminated the volumes and quantities of wasted units, pipes,

       accessories, and silts for treatment and reserve effectively

 

 

1. high purification effect to purify the radiation

  contaminations into the concentrated & coagulated

silts clear effectively

2. The concentrated & coagulated silts are suitable for

  dewater, dry and separation, also eliminated the

  volumes and quantities for further treatment and

  reserve effectively

3. The specific Nano-polymer design will be eliminated

  the radiation intensity of concentrated, accumulative

  silts effectively for further treatment and reserve

4. eliminated the volumes and quantities of wasted

  units, pipes, accessories, and silts for treatment and

  reserve effectively

 

 

　

Bright Glory Enterprise,Co.Ltd/

SanDa membrane & Nano,Co.Ltd

5F-3, No.162, Sec. 4, Chunghsiao E. Road, Taipei, Taiwan          

Tel: 886-02-2731-8306        Fax: 886-02-2731-8221   

web site: www.bge.com.tw  web site: http://3w.bge.com.tw     Email: hong@bge.com.tw